From 0347c42ae6208de5362f5dc5f9eb5eebe69b991e Mon Sep 17 00:00:00 2001 From: Pete ba Date: Sat, 1 Jun 2019 03:03:59 +0100 Subject: [PATCH] Link to README.md --- README.md | 4 +++- docs/wifi-hotspot.md | 2 +- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/README.md b/README.md index be8368d..99d89e3 100644 --- a/README.md +++ b/README.md @@ -46,7 +46,9 @@ Many PWS already support the Weather Underground format and can be connected to To do this intercepting, you place a physical device - such as a Raspberry Pi - in-between the PWS and the home network. It is this "man-in-the-middle" device that will look for information heading from the PWS toward the WU cloud and redirect that information to the local Weather Service. -For more information on configuring a Raspberry Pi Zero W to act as a "Man In The Middle" solution click [here](docs/man-in-middle.md) +For more information on configuring a Raspberry Pi Zero W to act as a "Man In The Middle" solution follow these links: +- If you have a PWS that connects to your home network using an ethernet cable then click [here](docs/man-in-middle.md) +- If you have a PWS that connects to your home network via wifi then click [here](docs/wifi-hotspot.md) **3 ) PWS Supported By WeeWX** diff --git a/docs/wifi-hotspot.md b/docs/wifi-hotspot.md index ca09b11..c097119 100644 --- a/docs/wifi-hotspot.md +++ b/docs/wifi-hotspot.md @@ -48,7 +48,7 @@ bridge_ports eth0 wlan0 Now we need to provide a mechanism to allow the PWS to connect to the Raspberry Pi's WiFi. We do this using the `hostapd` package to create a dedicated Access Point for the PWS. -You need to edit the hostapd configuration file, located at `/etc/hostapd/hostapd.conf`. This is an empty file so we just need to open it up in an editor add the somes lines from below: +You need to edit the hostapd configuration file, located at `/etc/hostapd/hostapd.conf`. This is an empty file so we just need to open it up in an editor add some line from below: ``` pi@raspberry:~ $ sudo nano /etc/hostapd/hostapd.conf ```